CREATIVE LABS, INC.

SOUNDBLASTER AWE32 (CT2760)

Card Type                 Sound card
Chip Set                  Creative Technology
Maximum Onboard Memory    Unidentified
I/O Options               CD-ROM interfaces (3), microphone connector, line
                          in connector, line out connector, speaker out
                          connector, game/MIDI port, PC internal speaker,
                          CD-ROM audio in connector, feature connector
Data Bus                  16-bit ISA

[Image]

                                CONNECTIONS

          Function             Label           Function             Label

  Line in connector            CN1     Feature connector            CN7

  Microphone connector         CN2     Panasonic CD-ROM             CN9
                                       interface

  Line out connector           CN3     Sony CD-ROM interface        CN10

  Speaker out connector        CN4     Mitsumi CD-ROM interface     CN11

  Game/MIDI port               CN5     PC internal speaker          JP15

  CD-ROM audio in connector    CN6

                        USER CONFIGURABLE SETTINGS

                 Function                    Label         Position

  »   Factory configured – do not alter       CN8        Unidentified

  »   Factory configured – do not alter       JP9        Unidentified
      (volume)

  »   Joystick enabled                       JYEN           Closed

      Joystick disabled                      JYEN            Open

  »   MP-401 enabled                         MPUEN          Closed

      MP-401 disabled                        MPUEN           Open

  »   MP-401 I/O address select 330          MSEL           Closed

      MP-401 I/O address select 300          MSEL            Open

  »   Factory configured – do not alter      SPDIF       Unidentified

                            DRAM CONFIGURATION

            Note: Board is factory installed with 512KB memory. The
            maximum amount of onboard memory is unidentified.

                         DRAM JUMPER CONFIGURATION

                 Setting                                JP2

  »        Memory upgrade disabled               Pins 2 & 3 closed

           Memory upgrade enabled                Pins 1 & 2 closed

                     CD-ROM SELECTION

    Type        J1          J2          J3          J4

  Creative     Open        Open        Open       Closed

    Sony       Open        Open       Closed       Open

  Mitsumi      Open       Closed       Open        Open

   Other      Closed       Open        Open        Open

                        AUDIO I/O ADDRESS SELECTION

         Address                    IOS0                    IOS1

  »           220                  Closed                  Closed

              240                   Open                   Closed

              260                  Closed                   Open

              280                   Open                    Open

                   MITSUMI CD-ROM PORT ADDRESS SELECTION

         Address                    CD0                      CD1

              310                  Closed                  Closed

              320                   Open                   Closed

  »           340                  Closed                   Open

              350                   Open                    Open

                   MITSUMI CD-ROM DMA CHANNEL SELECTION

         Channel                   DRQ6                     DRQ7

              6                   Closed                    Open

  »           7                    Open                    Closed

        CSP CHIP SELECTION

  Setting      APSD        IFSD

  Enabled      Open        Open

  Disabled    Closed      Closed

  MITSUMI CD-ROM INTERRUPT SELECTION

   IRQ      IRQ3      IRQ10    IRQ11

    3      Closed     Open      Open

    10      Open     Closed     Open

    11      Open      Open     Closed